首页 > 行业知识 > 内容

木门雕刻机各部件简介

一:木门雕刻机精度问题:


1. Precision of wooden door engraving machine:


通常,小幅面机雕刻1mm汉字,或大幅面雕刻机刻1.5mm小字,在放大镜下都要看得非常清晰。


Usually, small size machine engraving 1mm Chinese characters, or large engraving machine engraved 1.5mm small words, under the magnifying glass to see very clear.


二:主轴电机及功率


Two: spindle motor and power.


主轴电机是电脑雕刻机的重要组成部件,其功能对电脑雕刻机整机的功能有着至关重要的影响。加工主轴一般分为两类:精密加工主轴和大功率堵截主轴。


Spindle motor is an important component of computer engraving machine, and its function has a vital influence on the function of computer engraving machine. The processing main shaft is generally divided into two types: precision machining spindle and high power block spindle.


1、精密加工主轴的特点是低噪音、高转速、高度,合适加工格外精密的工件,如印章、铭牌、胸牌礼物等。此类电机一般为高速变频电机,功率较小,般在250W以下。缺陷是堵截厚的资料的才能较差,不合堵截较厚的资料。


1. The features of precision machining spindle are low noise, high speed and height, suitable for the processing of extremely precise workpieces, such as seals, nameplates, and chest gifts. This kind of motor is generally high speed frequency conversion motor, the power is small, as below 250W. Defect is the ability to block thick data is poor, do not block the thicker data.


2、大功率堵截主轴,首要用于堵截、大功率刻,特点是功率大,切开才能强,格外合适割宇、三立体字,当然也能够制造胸牌、铭牌、印章等。此类大功率主轴依据电机的特性一般可分为无刷频高速沟通电机和有刷沟通电机,其首要区别是:


2, high-power block the spindle, first used in the block, high power, is characterized by large power, cutting ability is strong, especially suitable to cut yu, three stereoscopic word, of course, also can be made the breastpiece, nameplate, seals, etc. According to the characteristics of the motor, such large power spindle can be divided into brushless high-speed communication motor and brush communication motor. The first difference is:


A、无刷变频电机转速高,变速规模为70060000转/分钟,而一般有刷沟通电机最高转速不超24000转/分钟;


A, brushless frequency conversion motor has high speed, and the variable speed is 70060000 RPM, while the maximum speed of brush communication motor is not more than 24000 RPM;


B、无刷变频电机旋转精度高,磨损小,噪音低,作噪音大大低于有刷沟通电机;


B. Brushless frequency conversion motor has high rotation precision, small wear and low noise, and makes noise greatly lower than the brush communication motor;


C、无刷变频电机堵转特性好,因为变频器上有特的限流电路,短时间的堵转不会焚毁电机,而有刷沟通机在超负荷运转或堵转时会很快冒烟焚毁,且不行修正;


C, locked-rotor characteristic frequency conversion brushless motor is good, because the frequency converter with current limiting circuit, locked-rotor not burning motor for a short period of time, and a brush communication machine in the overload operation or locked-rotor decay quickly smoke, and no correction;


D、无刷变频电机选用变频操控技能调速,是专业级商品,寿数长,厂家供给1年免费包换,今后还能够经过替换高速轴承对电机进行保护,而有刷沟通电机因为使用电札寿数大约在300小时就得替换马达或电机碳刷,所以碳刷沟通电机一般一天也不保修。


D, selection of frequency conversion brushless motor variable frequency speed regulation control skills, is a professional commodity, taking long, manufacturers supply 1 year free replacement, the future will also be able to pass to replace high speed bearing for motor protection, communication and a brush motor because of using electricity Zagreb life spans about 300 hours will have to replace carbon brush motor or motor, so the carbon brush motor generally does not guarantee a day communication.


三:吸尘装置


3: dust collection device.


木门雕刻机在工作时会产生大量的粉尘,雕刻机应该设计有良好的吸尘装置。


Wooden door engraving machine will produce a lot of dust when working. The engraving machine should be designed with good dust collecting device.


四:吸附固定台面


Four: adsorption fixed table.


木门雕刻机在工作过程中雕刻速度非常快,力量非常大,普通夹具的固定方式很难固定,所以选购木工雕刻机都应配备真空吸附平台,用以固定雕刻材料。


Wood engraving machine carving very fast in the process of work, the strength is very large, common fixture fixed way hard to fixed, so the choose and buy woodworking engraving machine should be equipped with a vacuum adsorption platform, to a fixed carving materials.

上一条: 深圳激光雕刻机精细雕刻操作方法

下一条: 真假四轴雕刻机

联系我们

地址:深圳市龙华区龙华新区新田白鸽湖路67号

电话:0755-84652512

电子邮箱:yifanlip@163.com

版权所有:深圳市天成鑫力数控设备有限公司